You might love to ride your motorcycle rather than washing it. However, after you ride it for a long weekend, you can enjoy bringing it back to showroom looks and washing your motorbike is a great way to do that and also to spend a couple of hours with your best friend – your motorbike!
Image Courtesy: motorcyclistlifestyle.com
When you hire Dazmac for importing motorcycles into Australia with ease, you should also learn to maintain it and keeping it clean so as to get optimum performance.
Here are a few important tips that will help you improve the looks and performance of your bike by giving it a thorough wash.
1. Preparation is Important
Prepare your bike for washing and make other preparations. Remove luggage, tank bags and any accessories such as a GPS that you don’t want to get wet. Also, keep all your cleaning and washing products ready.
2. Materials Needed
You should get a bucket, liquid detergent or soap, degreaser and/or engine cleaner, tar and bug remover, a toothbrush, tyre cleaner, a brush for cleaning wheels, metal polish, paint polish, 100% cotton sponges, at least two microfibre rags, WD40, abrasive rags, various microfibre or soft cotton towels and a chamois for drying.
3. When and Where to Wash Your Bike
Avoid commercial washing services and do it yourself. Don’t wash the bike in a unit driveway or on the street because it’s dangerous. Also never start washing immediately after a long ride. Let the bike cool down, because you shouldn’t spray cold water on a hot engine.
Also remember to avoid washing directly under the sun or in the middle of the day because it can dry soaps on the bike’s surface before you wash them off, leaving streaks.
Impurities in water, e.g. mineral deposits, also turn much more stubborn when warm and if you spray water on a hot bike, those water spots become more difficult to eliminate.
You can choose the eco-friendly option of washing on your lawn so that your grass will be watered and also the harmful detergents and pollutant grease and precious water will be prevented from entering storm water drains.
Image Courtesy: guidelineshealth.com
4. Have a Frequency but Avoid Overdoing
For this, you will have to achieve a balance. Frequent washing will make you aware of any potential problems, such as damaged or loose parts, fluid or oil leaks etc.
Squashed bugs if left on your paintwork become difficult to remove later and can be prominently seen as blemishes. Also if they are in your radiator, there can be overheating problems.
If you wash regularly, you can shift lubricants from cables and uncovered grease points on old engines. If you are returning from bush and your bike is covered with mud during your adventure, you’ll need a complete wash.
However, if you have only visited your favourite mountain inn, your bike might only require a light wipe over with a bodywork or windscreen spray and a soft cloth.
5. Use Water and Right Cleaning Agents
Don’t wash the bike with a lot of water. Use a suitable cleaning agent for the job. Be wary of abrasive cleaners or even regular household cleaning agents because they can damage chrome or paint.
If you use detergents, they should have a pH between 6 and 8, i.e. they should neither be too acidic nor too alkaline as either could harm your paint.
Make sure it’s safe for all paint types. Avoid vinyl cleaners for cleaning seat because while it may look shiny, it will be slippery too.
If you are going to use any harsh products to deal with hard jobs, you should consider wearing rubber gloves.
6. High-Pressure Cleaning
High-pressure cleaning is helpful in clearing toughened mud and hardened grime; however, it can also spurt water into electrics and crannies where it can remain pooled and cause corrosion or degreasing of important parts.
Therefore, be careful about electronics, electrics, instruments, brakes, chain and vinyl seats while using pressure cleaning.
Just as you can get Dazmac Logistics for boat shipping in Australia, you can take their help for importing motorcycle and other vehicles too. Taking care of your imported vehicles and keeping them clean is essential to protect your precious investment.