Best Maintenance Procedures for Checking Greased Wheel Ends

Auto experts and car enthusiasts alike would probably agree with us when we say having well-maintained greased wheel ends is one of the best things you can do to prolong your vehicle’s useful life. But most of them will also give the nod to us when we say keeping greased wheel ends can sometimes be challenging. Hence, if you really want your automobile to provide you more years of reliable service, then you must follow certain proper maintenance procedures religiously and diligently.

But there’s no reason to fret now. As your leading cash for cars Melbourne company, Rapid Car Removal is here to guide you throughout the whole process. Our team of knowledgeable and well-experienced car wreckers, mechanics and recyclers ought to provide you with the best tips for checking and maintaining greased wheel ends. Ensuring your vehicle’s reliability and getting better mileage is never a problem when you follow these procedures:

Image result for Best Maintenance Procedures for Checking Greased Wheel Ends

Safety first!

As always, safety should always be your first and topmost concern. Before you do anything about your car’s wheel ends, make sure you have done all the essential steps to ensure your safety.

Never ever attempt to work under your vehicle if it’s just supported/lifted by a jack. Always use the proper car stands and wheel blocks so that you’re sure the vehicle won’t roll when you release the brakes.

Since we’re talking about grease or lubes here, it’s also best if you wear protective gear – eye protection, gloves, and much better if you’re in a work jumpsuit.

And before actually doing anything, prepare all the tools and equipment you’re going to use so you won’t go back and forth in finding or getting them. You’ll finish up faster that way.

How do you know your wheel ends need extra attention?

These are just some of the signs that indicate your greased wheel ends need extra TLC:

  • The oil on your hubcap is discolored or burnt.
  • You hear a grinding noise; you smell a burning odor; and you feel an abnormal side pull when you use your brakes.
  • Insufficient lubrication levels and wetness around your gasket area, wheel seals, or hubcap.
  • Any time your wheels get submerged in floodwater.
  • After your vehicle has been into storage after a long period of time.

Proper checking of greased wheel ends:

  • Lift and support each wheel axle using the proper stands and blocks. Rotate each wheel and see if there’s any vibration. If you notice that the rotation is not really smooth, inspect your wheel bearings.
  • To inspect your wheel bearings, use a dial indicator. If the endplay is out of the “.001 to .005” range, then you’d have to see if your bearings actually have signs of wear and damage.
  • Take out the outer bearing of each wheel and then check the lubricant levels. Both under- and over-fill conditions shorten wheel end life; so it’s but essential that the lubricant is at proper levels. If you use semi-fluid grease, it should be between the 3:00 and 9:00 fill levels. But if you use hard grease, it should seen in all the rollers and filled in the hub cavity to the bearing races.
  • Check the quality of the grease. It’s contaminated with moisture if you see that it’s now foamy or milky white. Now if that’s the case, you must remove all the lube out of the hub and clean it. See if a considerable amount of grit, metal debris, dirt, and hard particles are present in the grease as well. You may use a metal magnet to know whether the debris in the grease are metallic. If they are indeed metallic, then you must check your bearings and other metal components – to see where these metal particles came from.

The very essence of having well-lubricated wheel ends is to prevent dreadful corrosion. While your car is in use, the metal-to-metal contact that happens in your wheels come adrift with small particles and other debris, and thereby causing a very hard ferrous oxide crystal formation (as a matter of fact in as quick as 2 months). When this happens, it can be extremely damaging and catastrophic for your vehicle. Hence, no one wants that with their cars, right?

So just follow these aforementioned tips so your wheel ends remain to be in good shape for a long time.

If you see corroded parts of your vehicle, apart from the wheel ends, that’s not a good sign. It may because it’s now too old; or you haven’t done much of the religious maintenance it needs. It’s also a sign that you’ll soon need auto parts replacement.

Leave a Reply

Your email address will not be published. Required fields are marked *